Aqua Medic Aquarium CO2 System

You are here: Home >

CO2 > CO2 Products: Aqua Medic

CO2 Products: Aqua Medic

If you're purchasing CO2 components individually, you'll need the following:

Reactor
Regulator
Bubble Counter
Tubing
CO2 Bottle (we sell the bottle, but you'll need to get it filled locally)

To have a completely automated CO2 system you need to ALSO have the following:

If you are using these CO2 products with a Calcium Reactor, you'll need the Regulator, Bubble Counter, Hose and CO2 bottle, but will not need the CO2 reactor. The Calcium Reactor will take the place of the CO2 reactor. For an automated system include the Solenoid Valve and pH controller.

Sort By:

Page of 1

Aqua Medic Bubble Counter

In Stock

Wholesale Price (Members Only)

The Aqua Medic bubble counter is a simple and safe unit for controlling the CO2 dosage into aquariums. It is filled up to the half with water and switched between pressure regulator or solenoid valve and the CO2 reactor, so that it remains without pressure. An integrated check valve prevents water from flowing back. Comes with strong mounting plate.

Aqua Medic CO2 Reactor 1000

In Stock

Wholesale Price (Members Only)

The CO2 Reactor 1000 is a hermetically sealed unit for introducing CO2 into large aquariums. It is externally mounted and can be used with aquaria up to 500 gallons. 15” x 3”.

User Manual (pdf format in new window)

Aqua Medic CO2 Reactor 500

In Stock

Wholesale Price (Members Only)

The CO2 Reactor 500 introduces CO2 into the aquarium. Secured to the inside of the glass, its advanced design offers a very high CO2 diffusion rate and automatically removes any unwanted gases. The reactor 500 is designed for aquaria up to 125 gallons.

User Manual (pdf format in new window)

Aqua Medic M-Ventil Solenoid Valve

In Stock

Wholesale Price (Members Only)

The Aqua Medic M-Ventil Solenoid Valve has a high quality body manufactured from nickel plated brass with a maximum operating pressure of 6 bar. Pressure fittings for 6mm flexible hose can be connected to all the C02 units we carry. The solenoid coil consumes only 2.5 watts of electrical energy to prevent overheating. In conjunction with a pH controller, automatic control of the CO2 supply and pH can be achieved. If used with a timer, the valve will provide a night shut off system. 110 volt AC.