|
|
|
|
|
|
Pacific Coast Imports 1/13 HP Mini Chiller
|
|
|
The Pacific Coast Imports 1/13 HP Aquarium Chiller is a compact, and easy to install aquarium chiller ideal for nano reef aquariums.
- Digital control. Internal temperature sensors (no probe needed).
- Automatic Digital Control
- 110 volts. 1.5 amps
- 1 year warranty
- Temperature Range 40°F to 85°F for the controller
- 10 degree cooling up to 50 gallons
- 5/8" and 3/4" Hose Barb Connections
- Does not have a pump.
The required flow through the chiller is 80 gph
- 10-1/4"L x 8"W x 16"H (height includes space needed for hose barbs
- Product Manual (pdf format in new window)
|
|
|
|
|
|
|
|
|
|
|
|
|
Sea Line SL-150A 1/10HP Aquarium Chiller
|
|
|
The Sea Line SL-150A 1/10HP Aquarium Chiller is a compact, sleek and easy to install aquarium chiller for small aquariums
Features:
- 2.2 amps/1,200 btus
- 20 degree cooling up to 40 gallons.
10 degree cooling up to 80 gallons. Note: These temperature pull-down ratings are in ideal situations. We highly recommend purchasing a chiller one size larger than the specifications would lead you to believe is necessary.
- Does not have a pump. The required flow through the chiller is between 200gph and 350gph. When sizing a pump keep in mind that aquarium chillers will add approx. six feet of head pressure.
- 1/2" and 5/8" Hose connections
- Dimensions: 15.5"L x 9"W x 16.5"H
- Microcomputer control system
- Extra large refrigerating capacity
- Freon-free R134a refrigerant, which is safe and environmentally friendly
- A superior quality condenser manufactured by the American OAK production line
- Anti-corrosive, pure titanium for freshwater and saltwater use
- Compressor protection device system built to shut off the circuit automatically to prevent the motor from burning out when the motor is overheated due to overload
- Memory temperature system that makes the chiller refrigerate continuously according to the last temperature setting
- Constructed of ABS plastic, which prevents rust and corrosion
- One year warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
JBJ 1/15HP Mini-Arctica Aquarium Chiller
|
|
|
- Quieter than similar sized aquarium chillers
- 2-Year warranty
- 900 BTUs/2.0 amps/115V
- Single stage controller
- Does not have a pump. The required flow through the chiller is between 110 gph and 160 gph.
- Maximum Tank Size: 40 gallons. If your tank is in a room that is at times over 82 degrees, or if you need to reduce the temperature more than 10 degrees, you should consider a larger chiller.
- 1/2" Hose Barb Connections
- Anti-freezing system will not allow the heat exchanger to freeze
- Contains safe Ozone Friendly Refrigerant (R134-A)
- Integrated Thermostat – Simple keypad programmable display with constant temperature readout accurate to +/- 1 F. Controller Range: 32-99F.
- 7.72" x 12.6" x 14.1"
- Decibel level: 39 dB
- Chillers should not be placed in an enclosed area without adequate air flow
- Product Manual (pdf format in new window)
- You might consider the JBJ Nano & Mini Arctica Titanium Installation Kit if you are using this chiller with a JBJ Nano Cube Aquarium
|
|
|
|
|
|
|
|
|
|
|
|
|
Oceanic 1/10 HP Aquarium Chiller
|
|
|
The Oceanic 1/10 HP Aquarium Chiller is a durable chiller with accurate temperature control.
- Does not have a pump. The required flow through the chiller is between 200 gph and 300 gph.
- Oceanic recommends this chiller for tanks up to 55 gallons
- Tubing Size Connections: 5/8" or 3/4" I.D
- L 15.75" x W 20.63" x H 18.88"
- One Year Limited Warranty
- Corrosion resistant titanium heat exchanger
- Programmable LED display. The LED display is highly visible and simple to use. Just press the up or down arrows to raise or lower the target temperature and press the “set” button to lock it in. On units with optional heater control, a LED light will indicate whether the unit is currently heating or cooling.
- Adjustable Inlet and Outlet Connections. The inlet and outlet connectors can be rotated by simply unscrewing the water chamber caps. As the caps are tightened the compression gasket completely re-seals the connection to prevent leaks.
- Reusable, Washable Air Filter. The included air filter keeps contaminates away from the cooling unit to ensure efficiency and longevity of the motor. The air filter is easily accessible and can be removed for cleaning, eliminating the need to purchase replacements.
|
|
|
|
|
|
|
|
|
|
|
|
|
JBJ 1/10HP Arctica Aquarium Chiller
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pacific Coast Imports 1/10 HP GenX CL-280 Aquarium Chiller
|
|
|
The Pacific Coast Imports 1/10 HP GenX CL-280 Aquarium Chiller is a compact, and easy to install aquarium chiller for small to medium sized tanks.
- 1,200 BTUs
- Digital control. Internal temperature sensors (no probe needed).
- Titanium heat exchanger
- 110 volts
- 1 year warranty
- Temperature Range 38°-80°F for the controller
- 10 degree cooling up to 80 gallons. 30 degree cooling up to 45 gallons.
- 1/2" and 5/8" Hose Barb Connections
- Does not have a pump. The required flow through the chiller is between 500 gph and 800 gph. When sizing a pump keep in mind that aquarium chillers will add approx. six feet of head pressure.
- 12"L x 12"W x 13.5"H
- db rating: 38
- Product Manual (pdf format in new window)
|
|
|
|
|
|
|
