SHIIPPING PRICES?







You are here: Home >
  • PUMPS >


    Powerheads:
    Seio Super Flow
  • Powerheads: Seio Super Flow
    Sort By:
    1
    Rio Seio Super Flow Powerhead Electronic Controller
    Rio Seio Super Flow Powerhead Electronic Controller

    Wholesale Price (Members Only)
    In Stock

    Rio Seio Super Flow Powerhead Electronic Controller is intended for use with only SEIO water pump models: 1100, 1500, and 2600. THE SEIO CONTROLLER WILL NOT WORK WITH ANY OTHER TYPE OF PUMP.
    • The controller will control one or two SEIO Super Flow Water Pumps. The pumps can be set to go from low to high; this surge can be set from 15 seconds to 30 minutes. The pumps on low operate at approximately 50% flow and then will ramp up to 100% when on high. There are also two preset feeding buttons at 8 minutes and 16 minutes. Once the time has elapsed the unit will go back to the original preset.
    • 8.5" X 2.75" X 6.5"
    • Replaceable 2.5 amp/250v fuse 
    Seio Super Flow Model M620 Powerhead
    Rio Seio Super Flow Model M620 Powerhead

    Wholesale Price (Members Only)
    In Stock

    The Rio Seio Super Flow Model M620 Powerhead flow rate is 620 gph.

    • Connections: no connections
    • Only 8 Watts, 15 watts less than the Rio 1700, which has about the same gph. This means less heat and less electricity usage for the same output.
    • Dimensions: 5.5" H x 2.16" W x 2.6" D
    • 6 foot power cord
    • Must be fully submersed
    • Ceramic shafts
    • Durable high-impact plastic impellers
    • Performance charts (new window)
    • Includes: 4 Suction Cups, 1 Adjustable 160 Swivel Side Discharge Hanging Bracket, 1 Adjustable Elevated Side Discharge Hanging Bracket, 1 Hang on the Tank vertical Mount, 1 Suction Cup Bracket, and 1 Bracket Saddle
    Recommended Accessories:
    Seio Magnet Mount 300 mm
    Seio Magnet Mount 300 mm

    Wholesale Price (Members Only)
    In Stock

    The Seio Magnet Mount 300 is a strong magnet that is used to hold powerheads in place and also can be used as an algae scraper. The Magnet Mount 300 can be used with the Seio M1100, Seio M1500, Rio 12HF, Rio 14HF, Rio 17HF, Rio 20HF, Rio 1700, Rio 2100 and Rio 2500HP. You might also consider the Magnet Mount 200, which can be used with some larger powerheads.

    Features:
    • Use in Glass and Acrylic Tanks
    • Mount the Pump Anywhere in the Tank
    • No More Failing Suction Cups
    • No More Unsightly Brackets
    • Affordable and Easy to Use
    • Additional photo
    Seio Magnet Mount 200 mm
    Seio Magnet Mount 200 mm

    Wholesale Price (Members Only)
    In Stock

    The Seio Magnet Mount 200 is a strong magnet that is used to hold powerheads in place and also can be used as an algae scraper. The Magnet Mount 200 can be used with the Seio M620, Seio M820, Rio 8HF and Rio 10HF. You might also consider the Magnet Mount 300, which can be used with some larger powerheads.

    Features:
    • Use in Glass and Acrylic Tanks
    • Mount the Pump Anywhere in the Tank
    • No More Failing Suction Cups
    • No More Unsightly Brackets
    • Affordable and Easy to Use
    • Additional photo
       
     
    1