Orders over $400.00, of qualified items, shipping to commercial addresses will be charged a flat shipping/handling fee of $11.95.

Orders under $400.00, orders for non qualified items, and orders shipping to residential addresses will be charged actual freight.






You are here: Home >
  • ELECTRONICS >


    Neptune Systems Apex Controllers
  • Neptune Systems Apex Controllers


    Features Apex Jr. System

    (Apex Jr Display, Apex Jr base module w/ 4 controllable outlets, temperature probe, and Ethernet cable)
    Apex Lite System

    (Apex Lite base module, Apex display, EnergyBar 8, temperature probe, and Ethernet cable)
    Apex System

    (Apex base module, Apex display, EnergyBar 8, temperature probe, standard pH probe, and Ethernet cable)
    Display Graphical (8x20) Graphical (8x20) Graphical (8x20)
    Ethernet Port Included Included Included
    Configuration via PC or Display Included Included Included
    Email Alarms Included Included Included
    Flash Memory for Easy Firmware updates Included Included Included
    Digital Inputs/Switches Optional w/ any PM module and w/ Breakout Box Optional with Breakout Box Optional with Breakout Box
    Moon Simulation Optional with LSM Module and with Lunar LED String, 3 LEDs or with the Lunar LED String, 5 LEDs
    Optional with LSM Module and with Lunar LED String, 3 LEDs or with the Lunar LED String, 5 LEDs Optional with LSM Module and with Lunar LED String, 3 LEDs or with the Lunar LED String, 5 LEDs
    Seasonal Temperature Variation Included Included Included
    Seasonal Sunrise/Sunset Included Included Included
    Maximum Amount of Additional Modules 4 240 240
    # of Outlets on the EnergyBar Four with the included Apex EnergyBar 4
    Eight with the included Apex EnergyBar 8
    Eight with the included Apex EnergyBar 8
    Datalogging (1,000s of entries) (10,000s of entries) (10,000s of entries)
    External 12V Power Capability NOT Available Optional w/ 12 Volt Power Supply Optional w/ 12 Volt Power Supply
    Variable Speed/Dimming Port (0-10V) Optional w/ Variable Speed/Dimming Module (VDM)
    Optional w/ Variable Speed/Dimming Module (VDM) 2 ports w/ 2 channels each (4 total) included
    Legacy Support (D4HD, DC8) NOT Included Included Included
    Temperature Monitor/Control Included Included Included
    pH Monitor/Control Optional w/ PM1 and w/ pH Probe Optional w/ PM1 and w/ pH Probe Included
    ORP Monitor/Control Optional w/ PM1 Optional w/ PM1 Included
    and w/ ORP Probe and w/ ORP Probe Optional w/ ORP Probe
    2nd pH Monitor/Control Optional w/ PM1 and w/pH Probe Optional w/ PM1 and w/ pH Probe Optional w/ pH Probe
    Conductivity/Salinity Monitor/Control Optional w/ PM2 and w/ Salinity Probe. Additional Temp Probe recommended. Optional w/ PM2 and w/ Salinity Probe. Additional Temp Probe recommended. Optional w/ PM2 and w/ Salinity Probe. Additional Temp Probe recommended
    Dissolved Oxygen Monitor/Control Optional w/ PM3 and w/ Dissolved Oxygen Probe Optional w/ PM3 and w/ Dissolved Oxygen Probe Optional w/ PM3 and w/ Dissolved Oxygen Probe
    Leak Detection Optional w/ ALD Module and w/ Leak Detection Probe(s) Optional w/ ALD Module and w/ Leak Detection Probe(s) Optional w/ ALD Module and w/ Leak Detection Probe(s)
    Wireless VorTech pump control Optional w/ WXM Module Optional w/ WXM Module Optional w/ WXM Module
    Automatic Feeding Systems
    Optional w/ AFS Automatic Feeding System Optional w/ AFS Automatic Feeding System Optional w/ AFS Automatic Feeding System
    Wave Pumps
    Optional w/ WAV Starter Kit Optional w/ WAV Starter Kit Optional w/ WAV Starter Kit
    Dosing
    Optional w/ DOS Multi-Purpose Dosing & Fluid Metering System Optional w/ DOS Multi-Purpose Dosing & Fluid Metering System Optional w/ DOS Multi-Purpose Dosing & Fluid Metering System
    Par Monitoring
    Optional w/ PAR Monitoring Kit (PMK) Optional w/ PAR Monitoring Kit (PMK) Optional w/ PAR Monitoring Kit (PMK)
    Sort By:
    1 2
    Neptune Systems Apex AquaController (Base Unit, Display, Std pH Probe, Temp Probe & EB8)
    Neptune Systems Apex AquaController (Base Unit, Display, Std pH Probe, Temp Probe & EB8)

    Wholesale Price (Members Only)
    In Stock

    With the Neptune Systems Apex AquaController you will be able to not only monitor what is happening in your tank, but you will also have 100% control while at home, or away to do something about it!

    This Apex System comes complete with:
    Comparing the Apex Jr. to the Apex and Apex Lite
    If you're trying to decide between the Apex, Apex Jr. & Apex Lite it is mostly a question of how many ports and what types of ports come with each version. The Apex Jr. comes with two AquaBus ports, an Ethernet port, a Temperature Probe port and four outlets. The Apex Lite comes with an AquaBus port (which connects to the EnergyBar8 with 6 ports), an Ethernet port, a Temperature Probe port, eight outlets (on the EnergyBar8), plus the Cntl RJ11 port, I/O MDin 8 & pH BNC ports. This Apex has everything the Apex Lite has with the addition of the ORP/pH2 BNC port and the V1/V2 & V3/V4 ports. Additionally, it comes with a Standard Grade pH probe.

    Kessil A360W Integration
    This Apex AquaController works seamlessly with the Kessil A360W LED Light. You will NOT need to purchase the VDM for this to work. However, you will need to purchase a Kessil Apex Controller Cable.

    This is a very complex product, and the description above is very abbreviated. Click here for a more complete description or take a look at the User Manual.
    Neptune Systems Apex AquaController (Base Unit, Display, Lab pH Probe, Temp Probe & EB8)
    Neptune Systems Apex AquaController (Base Unit, Display, Lab pH Probe, Temp Probe & EB8)

    Wholesale Price (Members Only)
    In Stock

    With the Neptune Systems Apex AquaController you will be able to not only monitor what is happening in your tank, but you will also have 100% control while at home, or away to do something about it!

    This Apex System comes complete with:
    Comparing the Apex Jr. to the Apex and Apex Lite
    If you're trying to decide between the Apex, Apex Jr. & Apex Lite it is mostly a question of how many ports and what types of ports come with each version. The Apex Jr. comes with two AquaBus ports, an Ethernet port, a Temperature Probe port and four outlets. The Apex Lite comes with an AquaBus port (which connects to the EnergyBar8 with 6 ports), an Ethernet port, a Temperature Probe port, eight outlets (on the EnergyBar8), plus the Cntl RJ11 port, I/O MDin 8 & pH BNC ports. This Apex has everything the Apex Lite has with the addition of the ORP/pH2 BNC port and the V1/V2 & V3/V4 ports. Additionally, it comes with a Lab Grade pH probe.

    Kessil A360W Integration
    This Apex AquaController works seamlessly with the Kessil A360W LED Light. You will NOT need to purchase the VDM for this to work. However, you will need to purchase a Kessil Apex Controller Cable.

    This is a very complex product, and the description above is very abbreviated. Click here for a more complete description or take a look at the User Manual.
    Neptune Systems Apex AquaController (Base Unit, Display, Lab pH Probe, Temp Probe & EB8)
    Neptunes Systems Apex AquaController Gold Package

    Wholesale Price (Members Only)
    In Stock

    With the Neptune Systems Apex AquaController you will be able to not only monitor what is happening in your tank, but you will also have 100% control while at home, or away to do something about it!

    This Apex System comes complete with:
    Features:
    Neptune Systems Apex Jr. AquaController Base Unit, Display & Temp Probe
    Neptune Systems Apex Jr. AquaController (Base Unit, Display & Temp Probe)

    Wholesale Price (Members Only)
    (Out of Stock)

    With the Neptune Systems Apex Jr. AquaController you will be able to not only monitor what is happening in your tank, but you will also have 100% control while at home, or away to do something about it! The Apex Jr. is the perfect option for those that want to have the basic functions of a controller, like light and temperature control, but have a smaller budget. But the beauty of the Apex Jr. is that you don’t have to sacrifice many of the cool features of the more expensive Apex controllers such as Internet connectivity, phone and SMS alerts, over-temperature protection, mobile phone and tablet access and much more.

    The Apex Jr. System comes complete with:
    • Apex Jr.
    • Apex Display Module
    • Apex Temperature Probe, Extended Life
    Comparing the Apex Jr. to the Apex and Apex Lite
    If you're trying to decide between the Apex, Apex Jr. & Apex Lite it is mostly a question of how many ports and what types of ports come with each version. This Apex Jr. comes with two AquaBus ports, an Ethernet port, a Temperature Probe port and four outlets. The Apex Lite comes with an AquaBus port (which connects to the EnergyBar8 with 6 ports), an Ethernet port, a Temperature Probe port, eight outlets (on the EnergyBar8), plus the Cntl RJ11 port, I/O MDin 8 & pH BNC ports. The Apex has everything the Apex Lite has with the addition of the ORP/pH2 BNC port and the V1/V2 & V3/V4 ports. Additionally, it comes with a pH probe.

    Kessil A360W Integration
    This Apex Jr. AquaController will only work with the Kessil A360W LED Light if you also have a Apex Variable Speed/Dimming Module (VDM). You will also need a Kessil Apex Controller Cable.

    This is a very complex product, and the description above is very abbreviated. Click here for a more complete description or take a look at the User Manual.
    Neptune Systems DOS Dosing System
    Neptune Systems DOS Multi-Purpose Dosing & Fluid Metering System

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems DOS Multi-Purpose Dosing & Fluid Metering System is a multi-purpose dosing and fluid delivery system of uncompromising quality. Use with the Apex, Apex Lite, or Apex Jr. (& Apex Fusion software wizards) for many applications.

    Includes:
    • DOS pump
    • Aquabus cable
    • Power supply
    • 4 ft 1/4" tubing
    Specifications:
    • Size (Approx.): 9.5″ x 5″ x 5″
    • Lift Height: 24 feet (minimum at MSL)
    • Suction Height: 24 feet
    • Flow Rate: Variable (0.1mL – 250mL/min)
    • Power Requirement: 110/120V or 220/24oV
    • Requires: Apex, Apex Lite, or Apex Jr.
    Neptune DOS HeadCap DOS-HEADCAP
    Neptune Systems Replacement DOS HeadCap (DOS-HEADCAP)

    Wholesale Price (Members Only)
    In Stock

    Replacement  Neptune Systems DOS HeadCap for the Neptune Systems DOS Multi-Purpose Dosing & Fluid Metering System. Complete assembly includes cover, peri-tube, fittings and roller wheel. Neptune Systems recommends that these be replaced approximately every 700 hours of pump run time. Neptune Systems part # DOS-HEADCAP.
    Neptune Systems Apex Wireless Expansion Module (WXM) For EchoTech Pumps
    Neptune Systems Apex Wireless Expansion Module (WXM) For EchoTech Pumps

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Wireless Expansion Module (WXM) allows for truly flexible control of Ecotech Marine Vortech and EcoSmart wireless pumps. With this module, your Apex will become the taskmaster telling your Vortech pumps exactly what to do based on time of day, feed mode, power outage mode, and just about any other thing you can can come up with.

    Features:
    • User Manual
    • Wirelessly controls any of EcoTech Marine's wireless pumps (Wireless Wave Driver or EcoSmart)
    • 11 Independent channels to support 11 pumps
    • Supports Ecotech Marine's Constant, Reef Crest, Lagoon Random, Nutrient Transport*, Tidal Swell*, Pulse, Sync and Anti-Sync modes (* requires EcoSmart pump driver)
    • Pump modes can be changed based on conditions and events throughout the day using powerful Apex programming commands
    • The WXM attaches to and is powered by the Apex system via AquaBus
    • Automatic plug-n-play for easy setup and configuration
    • Pumps can be dynamically added/removed from the system
    • Upgradable WXM and EcoTech Marine pump firmware upgrade through AquaBus via the Apex Base Module
    • Multi-color LED Status and Wireless Status indicators
    • 2 AquaBus ports for flexible system connections
    • Comes with a 3 foot AquaBus cable
    • Compatible with Apex, Apex Jr. and Apex Lite systems
    • Neptune Systems SKU: WXM
    Apex Variable Speed Dimming Module VDM
    Neptune Systems Apex Variable Speed/Dimming Module (VDM)

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Variable Speed/Dimming Module (VDM) provides the ability to control advanced LED lights such as the Kessil A360W, Aqua Illumination Sol and Acan Lighting LED Lights.

    Kessil
    If you use the Apex Lite or Apex Jr. with the Kessil A360W, you WILL need the VDM. With the Apex you will NOT need the VDM to control your A360W. The VDM will turn the light on & off and vary intensity at user defined intervals throughout the course of the day. It will also adjust the color shift from blue to white.

    Aqua Illumination Sol
    Aqua Illumination's Sol interface allows for the independent control of both the blue and white LEDs. In addition, sunrise/sunset, cloud and lightning simulation are also available. The VDM will work with both the two color & three color Sol Lights.

    Acan
    If used with your Acan Light, the Acan light must have a connection port. This port was originally standard, but is now an upgrade.

    Other Features:
    • User Manual
    • Lighting and pump modes can be changed based on conditions and events throughout the day using powerful Apex programming commands.
    • 4 independently variable speed ports (0-10V)
    • Variable speed ports can be used for light dimming, Tunze stream variable speed control, or with other 0-10V compatible devices.
    • The VDM attaches to and is powered by the Apex system via AquaBus.
    • Automatic plug-n-play for easy setup and configuration.
    • Upgradable firmware through AquaBus.
    • Multi-color LED status indicator.
    • 2 AquaBus ports for flexible system connections.
    • Comes with a 3 foot AquaBus cable.
    • Compatible with Apex, Apex Lite & Apex Jr. systems
    • Neptune Systems SKU: VDM
    Neptune Systems Apex Lunar Simulator Module (LSM)
    Neptune Systems Apex Lunar Simulator Module (LSM)

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Lunar Simulator Module (LSM) can be used with any Neptune Systems Apex LSM Lunar LED Strings. The LSM Lunar LED Strings must be purchased separately. This product will only work with Neptune Systems Apex, Apex Lite and Apex Jr systems AquaControllers.

    Neptune Systems SKU: LSM

    Neptune Systems Apex LSM Lunar LED String, 3 LEDs
    Neptune Systems Apex LSM Lunar LED String, 3 LEDs

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex LSM Lunar LED String, 3 LEDs, needs to be used in combination with the Neptune Systems Apex Lunar Simulator Module (LSM). This product will only work with Neptune Systems Controllers.

    This string of LED easily mounts to the inside of your canopy or onto a standard light fixture above your tank.

    Neptune Systems SKU: LED3

    Neptune Systems Apex LSM Lunar LED String, 5 LEDs
    Neptune Systems Apex LSM Lunar LED String, 5 LEDs

    Wholesale Price (Members Only)
    (Out of Stock)

    The Neptune Systems Apex LSM Lunar LED String, 5 LEDs, needs to be used in combination with the Neptune Systems Apex Lunar Simulator Module (LSM). This product will only work with Neptune Systems Controllers.

    This string of LED easily mounts to the inside of your canopy or onto a standard light fixture above your tank.

    Neptune Systems SKU: LED5

    Neptune Systems Apex AFS-110 Automatic Feeding System
    Neptune Systems Apex AFS-110 Automatic Feeding System

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex AFS-110 Automatic Feeding System is the only automatic fish feeder designed specifically to work with the Apex AquaController. Not only does it seal your food to keep it dry, but it meters out small amounts of food on the schedule you set right in your Apex. Feedings can be combined with other operations such as powering off return pumps, skimmer, etc. and then automatically turning them back on after a set amount of time.

    Features:

    • User Manual
    • Feeds pellet or flake food in varying amounts
    • Apex can be set so that the AFS will feed from one time to as many times as you like throughout the day
    • Connects via the Apex AquaBus port
    • "Stay-dry" system has a sealed food container that extends and retracts for each feeding. This keeps food dry and prevents clumping.
    • The lowest setting feeds just a few grains of pellet food so multiple small feedings are possible
    • Allows for optimal feeding — small amounts many times a day
    • Feedings can be combined with other operations such as powering off return pumps, skimmer, etc. and then automatically turning them back on after a set amount of time.
    • Adjustable mounting clip extends up to two inches (or velcro can be used) so it will work in almost every aquarium configuration.
    • Includes 15′ AquaBus Cable
    • Compatible with the Apex, Apex Lite, and Apex Jr. AquaControllers.
    Neptunes Systems Crossover Diet
    Neptunes Systems Crossover Diet Pellet Food

    Wholesale Price (Members Only)
    In Stock

    Crossover Diet pellet food by Neptune Systems is the ideal food for the Neptune Systems Apex AFS-110 Automatic Feeding System. Neptune Systems worked closely with Reed Mariculture (the manufacturer of Reef Nutrition foods) to come up with this exclusive new food based on their TDO Chroma Boost that would dispense in consistent quantities from the AFS and bring out the vibrant colors in your fish. Not only that, the proprietary Crossover Diet pellets have food for both your fish AND corals. A micro-film of coral food is applied to the surface of every pellet during manufacturing. When these pellets are dispensed by the AFS, this micro-coral-food is dispersed upon contact with the water and then the pellets sink for the fish to consume. Even if you do not have a coral reef tank, this food is beneficial other micro-fauna in your tank. The AFS Automatic Feeding System along with our Crossover Diet pellets are the all-in-one feeding solution for your aquarium.
    Neptune Systems Apex EnergyBar 4
    Neptune Systems Apex EnergyBar 4

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex EnergyBar 4 Module is designed for use with the Apex AquaController. The AquaController we sell already come with an EnergyBar—you may want to buy an extra EnergyBar to add outlets to your system. The EnergyBar 4 module features 4 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power bar unique.

    Features:
    • User Manual
    • 4 independently controllable 120V Outlets (3 outlets @ 8 Amps, 1outlet @ 12 Amps, total current must be less than 15 Amps)
    • Plug and Play
    • Includes AquaBus cable
    • Built-in 4 Port hub so that accessories can be easily added
    • Active electrical current monitoring and logging
    • Fail-safe features. On communication failures outlets revert to user settable default settings
    • High reliability direct wired connection to the Apex System (does not use X10)
    • All four of the outlets use mechanical relays for switching
    • Up to 240 EB4s can be daisy chained together for up to 960 switched outlets
    • Built-in circuit breaker protected
    • 4 Mounting Holes for easy installation
    • Compact custom aluminum enclosure (7.5" x 3.75" x 1.8")
    • Neptune Systems SKU: EB4
    Neptune Systems Apex EnergyBar 8
    Neptune Systems Apex EnergyBar 8

    Wholesale Price (Members Only)
    (Out of Stock)

    The Neptune Systems Apex EnergyBar 8 Module is designed for use with the Apex AquaController. The AquaController we sell already come with an EnergyBar—you may want to buy an extra EnergyBar to add outlets to your system. The EnergyBar 8 module features 8 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power bar unique.

    Features:
    • User Manual
    • 8 independently controllable 120V Outlets (total current must be less than 15 Amps)
    • Plug and Play
    • Includes AquaBus cable
    • Built-in 6 Port hub so that accessories can be easily added
    • Active electrical current monitoring and logging
    • Fail-safe features. On communication failures outlets revert to user settable default settings
    • High reliability direct wired connection to the Apex System (does not use X10)
    • All four of the outlets use mechanical relays for switching
    • Up to 240 EB8s can be daisy chained together for up to 1920 switched outlets
    • Built-in circuit breaker protected
    • 4 Mounting Holes for easy installation
    • Compact custom aluminum enclosure (10.0" x 3.75" x 1.8")
    • Neptune Systems SKU: EB8
    Neptune Systems Apex WAV Starter Kit
    Neptune Systems Apex WAV Starter Kit

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems WAV Starter Kit moves water. Around 4000 gallons per hour! Better yet, compared to pumps with the same amount of flow, the WAV is smaller, uses less power, and is quieter than the most popular powerhead pumps on the market.

    Requires:
    • Requires an Apex, Apex Gold, Apex Lite or Apex Jr.
    Includes:
    • Two WAV Powerheads
    • 1Link Module
    • 100W 24VDC Power Supply
    • 3 foot AquaBus Cable
    Features:
    • Around 4,000 gph flow for each powerhead
    • Compact size
    • Directional flow (pivots with 40 degree range of motion and can be rotated – great for rear wall use)
    • Safe, 24V DC operation
    • Low power consumption – <35W at the wall
    • Multiple operational modes (random flow modes, mirror, inverse, etc.)
    • Easy to clean (pump automatically shuts off when removed from water)
    • Incredibly quiet
    • Magnetic mount works on up to 1″ glass
    • Easy installation with just a single skinny wire from each WAV Powerhead to the 1Link Module for all power and control (1LINK interface makes it a snap!)
    • Use Apex Fusion to control the WAV
    Neptune Systems Apex PAR Monitoring Kit (PMK)
    Neptune Systems Apex PAR Monitoring Kit (PMK)

    Wholesale Price (Members Only)
    In Stock

    With the Neptune Systems Apex you can monitor and log your aquarium’s light levels 24 hours a day! The perfect tool to fine tune your lighting on your tank. Now you now can adjust your lights with the confidence of knowing you will not be giving too much or too little light to your corals and plants.

    Requires:
    • Requires an Apex, Apex Gold, Apex Lite or Apex Jr.
    Includes:
    • ASM – Advanced Sensors Module
    • NPS – Neptune PAR Sensor
    • Real Reef Rock
    • 6 foot AquaBus Cable
    Features:
    • Performs continuous light-level monitoring for your aquarium. Use Apex Fusion to log the light levels over time.
    • Measures actual PAR – the light corals and plants use
    • Prevents burning out corals by making sure they don't get too much PAR
    • Includes ASM – the new Advanced Sensors Module
    • PAR sensor hides nicely in aquarium inside Real Reef Rock
    • Fine tune your lighting to your aquariums’s needs
    Neptune Systems Apex Advanced Leak Detection Module (ALD)
    Neptune Systems Apex Advanced Leak Detection Module (ALD)

    Wholesale Price (Members Only)
    (Out of Stock)

    The Neptune Systems Apex Advanced Leak Detection Module (ALD) gives your Apex the ability to detect water on the floor in up to four separate locations and tells your Apex to sound an alarm or send you an email. This new module is Plug-and-Play, connecting to the Apex System’s AquaBus. It has four separate probe ports where you can plug in either the Apex Advanced Leak Detection Low-Profile (under-carpet) Probe (ALD-P1) (perfect for under carpets) or the Apex Advanced Leak Detection Solid-Surface Probe (ALD-P2). The ALD has four inputs for the ALD probes.
    Neptune Systems Apex Advanced Leak Detection Low-Profile (under-carpet) Probe (ALD-P1)
    Neptune Systems Apex Advanced Leak Detection Low-Profile (under-carpet) Probe (ALD-P1)

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Advanced Leak Detection Low-Profile (under-carpet) Probe (ALD-P1) is designed for use with the Neptune Systems Apex Advanced Leak Detection Module (ALD). The Low-Profile Probe slides easily under a carpet that is behind or next to your aquarium. Alternatively, you could use the Solid-Surface Probe (ALD-P2), which is a tad larger and is designed to be placed on solid surfaces.
    Neptune Systems Apex Advanced Leak Detection Solid-Surface Probe (ALD-P2)
    Neptune Systems Apex Advanced Leak Detection Solid-Surface Probe (ALD-P2)

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Advanced Leak Detection Solid-Surface Probe (ALD-P2) is designed for use with the Neptune Systems Apex Advanced Leak Detection Module (ALD). This Solid-Surface Probe (ALD-P2) is designed to be placed on solid surfaces. Alternatively, you could use the Low-Profile Probe, which is a tad smaller and slides easily under a carpet that is behind or next to your aquarium.
    Apex 2 Channel AquaSurf/Apex to Tunze Cable
    Neptune Systems Apex 2 Channel AquaSurf/Apex to Tunze Stream Cable (SURFCAB2)

    Wholesale Price (Members Only)
    (Out of Stock)

    Neptune Systems Apex 2 Channel AquaSurf/Apex to Tunze Stream Cable
    (SURFCAB2) is a 2 channel Apex to stream cable assembly.  It has one
    RJ45 connector which plugs into the Apex base unit, and two Din5
    connectors which plug into two Tunze Controllable Stream pumps
    Neptune Systems Apex pH / ORP Probe Module PM1
    Neptune Systems Apex pH / ORP Probe Module, PM1

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex pH / ORP Probe Module, PM1, is just what you need if you want to monitor pH or ORP in your tank. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, leak alarms or whatever else you may come up with. The Neptune Systems Apex Probe is NOT included. This product will only work with Apex and Apex Lite AquaController Systems.
    • User Manual
    • Perfect for someone that wants to add an additional pH or ORP port to their Apex System
    • Monitor pH or ORP.
    • Control outlets based on pH or ORP readings from the probe connected to the PM1.
    • Automatic temperature compensation for pH with connected temperature probe (temperature probe optional).
    • Monitor and control temperature with connected temperature probe (temperature probe optional).
    • Galvanic Isolation for accurate and reliable probe readings.
    • 6 digital inputs for float switches, water on the floor sensors, pressure sensors, etc.
    • Full data logging and graphing through the Apex Base Module.
    • The PM1 attaches to and is powered by the Apex system via AquaBus.
    • Automatic plug-n-play for easy setup and configuration.
    • Upgradeable firmware through AquaBus via the Apex Base Module.
    • Multi-color LED Status Indicator.
    • 2 AquaBus ports for flexible system connections.
    • Comes with a 3 foot AquaBus cable
    • Neptune Systems SKU: PM1
    4.01 Calibration Solution
    Milwaukee Instruments 4.01 Calibration Solution, Single Use Packet, 20ml

    Wholesale Price (Members Only)
    In Stock

    Milwaukee Instruments 4.01 Calibration Solution is for use with or use with aquarium pH meters to measure the pH in freshwater aquariums
    7.01 Calibration Solution
    Milwaukee Instruments 7.01 Calibration Solution, Single Use Packet, 20ml

    Wholesale Price (Members Only)
    In Stock

    The Milwaukee Instruments 7.01 Calibration Solution is for use with or use with aquarium pH meters to measure the pH in saltwater and freshwater aquariums
    10.01 Calibration Solution
    Milwaukee Instruments 10.01 Calibration Solution, Single Use Packet

    Wholesale Price (Members Only)
    In Stock

    The Milwaukee Instruments 10.01 Calibration Solution is for use with or use with aquarium pH meters to measure the pH in saltwater aquariums
    Neptune Systems Apex pH Probe, Lab Grade
    Neptune Systems Apex pH Probe, Lab Grade

    Wholesale Price (Members Only)
    (Out of Stock)

    The Neptune Systems Apex pH Probe, Lab Grade, is meant for use with the Neptune Systems Apex pH / ORP Probe Module, PM1.

    Neptune Systems SKU: PRBPH

    Neptune Systems Apex pH Probe, Standard Grade
    Neptune Systems Apex pH Probe, Standard Grade

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex pH Probe, Standard Grade, is meant for use with the Neptune Systems Apex pH / ORP Probe Module, PM1.

    Neptune Systems SKU: PRBPHS

    Neptune Systems Apex ORP Probe, Standard Grade
    Neptune Systems Apex ORP Probe, Standard Grade

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex ORP Probe, Standard Grade, is meant for use with the Neptune Systems Apex pH / ORP Probe Module, PM1.

    Neptune Systems SKU: PRBORPS

    Neptune Systems Apex ORP Probe Lab Grade
    Neptune Systems Apex ORP Probe, Lab Grade

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex ORP Probe, Lab Grade, is meant for use with the Neptune Systems Apex pH / ORP Probe Module, PM1.

    Neptune Systems SKU: PRBORP

    Neptune Systems Apex Salinity Conductivity Module
    Neptune Systems Apex Salinity (Conductivity) Module, PM2

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Salinity (Conductivity) Module, PM2, will help you to maintain consistent salinity. The Neptune Systems Apex Salinity (Conductivity) Probe is NOT included. This product will only work with Apex and Apex Lite AquaController Systems.

    Maintaining consistent salinity in your aquarium is key to the well being of every organism inside it. And, as busy as we sometimes are, we don’t even realize our parameters are out of whack until it’s too late. With this module, your Apex will be constantly monitoring the Salinity in your tank and will let you know the minute it is trending outside of the safety zone. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, leak alarms or whatever else you may come up with. Salinity varies with water temperature. This extra temperature port is extra important because, when used, it is coupled with the conductivity probe’s value to calculate the most accurate real-time salinity measurement possible.

    Features:
    • User Manual
    • Monitors conductivity (salinity)
    • Control outlets based on conductivity readings from the conductivity probe connected to the PM2.
    • Automatic temperature compensation with connected temperature probe (Apex Temperature Probe NOT included).
    • Monitors and controls temperature with connected temperature probe (Apex Temperature Probe NOT included).
    • Galvanic Isolation for accurate and reliable probe readings.
    • 6 digital inputs for float switches, water on the floor sensors, pressure sensors, etc.
    • Full data logging and graphing through the Apex Base Module.
    • The PM2 attaches to and is powered by the Apex system via AquaBus.
    • Automatic plug-n-play for easy setup and configuration.
    • Upgradeable firmware through AquaBus via the Apex Base Module.
    • Multi-color LED Status Indicator.
    • 2 AquaBus ports for flexible system connections.
    • Comes with a 3' AquaBus cable.
    • Neptune Systems SKU: PM2
    Neptune Systems Apex Salinity (Conductivity) Probe, Lab Grade
    Neptune Systems Apex Salinity (Conductivity) Probe, Lab Grade

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Salinity (Conductivity) Probe, Lab Grade, is meant for use with the Neptune Systems Apex Salinity (Conductivity) Module, PM2.

    Neptune Systems SKU: PRBCOND

    Neptune Systems Apex Conductivity Calibration Solution, 53.0 mS
    Neptune Systems Apex Conductivity Calibration Solution, 53.0 mS

    Wholesale Price (Members Only)
    In Stock

    Use this Conductivity Calibration Solution, 53.0 mS to calibrate your Conductivity Probe and PM2 for salinity monitoring. 20 mL.

    Neptune Systems SKU: COND53

    Neptune Systems Apex Temperature Probe, Extended Life
    Neptune Systems Apex Temperature Probe, Extended Life

    Wholesale Price (Members Only)
    In Stock

    The Neptune Systems Apex Temperature Probe, Extended Life, can be used to replace the temperature probe you received with your Apex System or you can put one on your PM2 or PM3 module for temperature compensated readings. You can also connect one to a PM1 to monitor the temperature on a second tank.

    Neptune Systems SKU: PRBTMPJR

    Neptune Systems Apex Dissolved Oxygen Temperature I/O Expansion Module PM3
    Neptune Systems Apex Dissolved Oxygen, Temperature, I/O Expansion Module, PM3

    Wholesale Price (Members Only)
    (Out of Stock)

    The Neptune Systems Apex Dissolved Oxygen, Temperature, I/O Expansion Module, PM3, includes support for dissolved oxygen, temperature, and 6 digital inputs. The Neptune Systems Apex Oxyguard Dissolved Oxygen Probe is NOT included. This product will only work with Apex and Apex Lite AquaController Systems.

    Many marine aquarists only give the oxygen content in their aquarium water a passing thought, not fully understanding how the level of the Dissolved Oxygen (DO) in their tanks can affect their entire tank population. In one way or another, everything (fish, invertebrates, corals, algaes, bacteria) in the oceans and in marine aquariums react with oxygen. Most of the living beings of this planet require oxygen in order to metabolize nutrients. Fish, invertebrates, corals, and bacteria ingest O2 and expel CO2 day and night.

    Your critters are not the only things that use oxygen in your tank. Organic materials (i.e. Dissolved Organic Compounds, uneaten food and fish detritus on the bottom of the tank) consume a lot of oxygen as they break down. And now it's even popular to add nitrifying bacteria additives which multiply very rapidly, consuming a large portion of the available oxygen in the tank water.

    Features:

    • User Manual
    • Monitor/Control dissolved oxygen and temperature
    • 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc.
    • Full datalogging support in Apex Base module
    • Up to 240 AquaBus modules can be added to the Apex system
    • Plug and Play. Automatically recognized when installed into the system
    • Two AquaBus connectors for flexible expansion via AquaBus
    • Comes with 3' AquaBus cable
    • Galvanic Isolation for accurate and reliable probe readings
    • Led Status Indicator
    • Upgradeable firmware
    • Neptune Systems SKU: PM3
    Neptune Systems Apex Oxyguard Dissolved Oxygen Probe
    Neptune Systems Apex Oxyguard Dissolved Oxygen Probe

    Wholesale Price (Members Only)
    (Out of Stock)

    • 0 to 19.9 ppm
    • Lab quality probe w/ 10ft cable
    • Temperature, Altitude, and Salinity Compensation
    • Mini Din 6 Connector

    Neptune Systems SKU: PRBDO

    Neptune Systems Dissolved Oxygen Probe Membrane Kit (5 membranes)
    Neptune Systems Dissolved Oxygen Probe Membrane Kit (5 membranes)

    Wholesale Price (Members Only)
    In Stock

    • Use this membrane kit to change out the membranes in your Dissolved Oxygen Probe
    • Includes five (5) membranes, five (5) O-rings, cleaning pad and electrolyte solution

    Neptune Systems SKU: DOMEM

    Neptune Systems Apex Oxyguard Dissolved Oxygen Calibration Adapter (DOCAL)
    Neptune Systems Apex Oxyguard Dissolved Oxygen Calibration Adapter (DOCAL)

    Wholesale Price (Members Only)
    (Out of Stock)

    Neptune Systems Apex Oxyguard Dissolved Oxygen Calibration Adapter (DOCAL).

    Neptune Systems SKU: DOCAL

    Neptune Systems Apex I/O Breakout Box
    Neptune Systems Apex I/O Breakout Box

    Wholesale Price (Members Only)
    (Out of Stock)

    The Neptune Systems Apex I/O Breakout Box allows you to connect external switches and I/O Inputs to your Apex AquaController. When connected to the I/O Port of your Apex, Apex Lite, or PM module, the Breakout Box gives you an easy way to connect up to six external switch inputs to your Apex. Examples of things you might connect in this manner include:
    • Float Switches for sump alerts or ATO (Auto Top-Off)
    • Push Buttons for special modes (Feed, Cleaning, etc.)
    • Leak Detectors
    • Magnetic switches on cabinets for intrusion detection
    • Supports 6 Digital inputs on the Apex, and Apex Lite
    • Many other creative uses
    Neptune Systems SKU: IOBREAKOUT

    Neptune Systems Apex AWM AI Wireless Module
    Neptune Systems Apex AWM AI Wireless Module

    Wholesale Price (Members Only)
    (Out of Stock)

    For years the Apex has given owners of the AI Sol lights a great way to control their tank lighting. Now, owners of AI Vega, Hyra or Hydra Fifty-Two will finally be able to wirelessly control their lights through their Apex systems and the AWM Module.

    Features:
    • User Manual
    • Enables control of the AI Vega, Hydra, and Hydra FiftyTwo LED Lights (but not AI Sols with wireless dongle)
    • Two AquaBus connectors for flexible expansion via AquaBus
    • Comes with 3' AquaBus cable.
    • Fully upgradeable. AWM firmware and light firmware can be updated for feature enhancement.
    • LED Status indicator and wireless status indicator
    • Compatible with all Apex Systems
    Neptune Systems Apex Advanced LED Dimming Cable for VDM (for AI and Acan LEDs)
    Neptune Systems Apex Advanced LED Dimming Cable for VDM (for AI and Acan LEDs)

    Wholesale Price (Members Only)
    In Stock

    Use this Apex Advanced LED Dimming Cable to connect Aqua Illuminations Sol LED Lights and Acan Lighting LED Lights to the Neptune Systems VDM Module. You can have complete control over your AI Sol and supported Acan Lighting LED Lights using this cable in conjunction with the Neptune Systems Apex Advanced LED Dimming, VDM. 9 feet of Cable.

    Neptune Systems SKU: AICABLE

       
     
    1 2