CoralVue Hydros DC Solenoid Water Valve (HDRS-SV-12VH)

Home > CONTROL > Controllers > Hydros Controllers >

Wholesale Price (Members Only)

Stock Status:In Stock

Product Code: HS21199

Description

The Hydros DC Solenoid Water Valve is a handy Hydros Control 2 and Control 4 accessory that provides easy on/off RO or RO/DI water flow. You can connect the solenoid to your reverse osmosis filter and use it to top-off your tank if you don’t have the room available for a separate ATO reservoir.

NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

The Hydros DC Solenoid Water Valve works in conjunction with a Hydros aquarium controller and an optical or mechanical water level sensor. When the sensor detects the water level is low, it opens the valve to allow fresh RO or RO/DI water to flow through and top-off your tank or sump. When the sensor senses that the water level is replenished, it will tell the Control 2 or Control 4 to shut off power to the solenoid. This closes the valve to stop the flow of reverse osmosis water. The Hydros DC Solenoid Valve should be connected to the product line coming off your reverse osmosis system. It has 1/4" push-connect fittings to insert standard RO tubing quickly and easily.

Instead of using the Hydros DC Micro Pump as your ATO pump, you can use the Hydros DC Solenoid Valve instead. Just plug it into a Drive Port on the Control 2 or Control 4 for power and control and configure in the Hydros app. It is recommended to install an auto-shutoff valve and check valve on your reverse osmosis system to prevent it from producing wastewater when the solenoid is closed.

Browse for more products in the same category as this item:

CONTROL > Controllers > Hydros Controllers
CONTROL > Controllers
CONTROL

	OASE Biomaster & FiltoSmart 200/300 Replacement Outlet Kit (Members Only)